load joint wall & floor Fast-setting, flexible, and highly abrasion-resistant cementitious grout with excellent resistance to de-icing salts. Suitable for grouting ceramics such as stoneware, porcelain stoneware, split tiles, coarse and fine ceramics, as well as reconstituted stone in areas subject to high mechanical stress and limited chemical exposure. Ideal for infrastructure projects such as tunnels and train stations, car washes, cold storage rooms, balconies, terraces, wet areas, and underfloor heating systems. Offers improved resistance to chemicals compared to conventional cement-based grouts. Resists high-pressure cleaning (up to 150 °C and 100 bar, short-term). When grouting slip-resistant or rough tiles, especially porcelain stoneware, any residue must be carefully removed while still fresh. Pre-testing of grouting and cleaning is recommended.
Substrat Flex Superfuge+ Natural stone & porcelain, Fast Fast-setting, flexible grout for porcelain, natural stone & concrete. Ideal for balconies, terraces & wet areas. Heat & scratch resistant. • Frost-resistant and waterproof • Dense, low-porosity structure • Suitable for underfloor heating • Vapor-permeable
Outdoor tile and paving joint mortar, 1-component High-quality, drainable joint mortar by Faktum for light-duty outdoor use. Ideal for grouting outdoor tiles, natural & engineered stone slabs on patios, paths & paved areas. Suitable for new and existing paving. • Drainable • Resistant to frost and de-icing salt • Applicable in light rain • Protection against light mechanical & chemical effects, such as sweepers & de-icing salt, etc.
Substrat Fast-Setting Repair & Leveling Mortar High-quality, fast-setting repair & leveling mortar for mineral substrates. Perfect for balconies, terraces & wet areas. Highly efficient & versatile. • Fast-setting • Water & frost resistant • Highly efficient • Suitable for underfloor heating
wide joint mortar floor Flexible, slurry-applicable narrow and wide joint mortar for grouting stoneware, porcelain stoneware, earthenware, and reconstituted stone. Suitable for joint widths from 2 to 20 mm in indoor and outdoor areas. Also suitable for wet and permanently wet areas. SUBSTRAT narrow and wide joint mortar is not acid-resistant. For use with acidic cleaners or in areas subject to mechanical stress, we recommend grouting with SUBSTRAT Epoxy Grout+. • frost and water resistant • suitable for underfloor heating • vapor-permeable • slurry-applicable
Substrat trass cement mortar Hydraulically hardening, cement-based dry mortar with trass for setting and laying natural stone slabs and steps using the thick-bed method. Also suitable for subsequent grouting of natural stones. Reduces the risk of discoloration. • Frost-resistant • Easy to apply • Good edge adhesion • Hydraulically hardening