Backing profiles | discover now

Backfill profiles

TEGUFIL® PE Hinterfüllprofil

TEGUFIL® PE Backing rod

TEGUFIL® PE is a backing rod made from closed-cell polyethylene foam with a smooth surface. The material prevents water absorption and reduces adhesion of the sealant to the profile, promoting optimum two-sided adhesion. At the same time, the relatively firm and elastic structure creates a convex limitation of the joint depth and improves the bonding surface of the sealant on the joint flanks. In addition, the profile acts as a reliable insulating material.

Application
Especially suitable as a backing rod for precisely cut joints outdoors, floor joints and joints that come into contact with water. Installation is carried out using a blunt tool.

from

CHF

36.75

/ 100 m

from

CHF

36.75

/ 100 m

16 Versions
TEGUFIL® PUR Hinterfüllprofil

TEGUFIL® PUR Backer Rod 15 mm / 1 m
TEGUFIL® PUR is an open-cell polyurethane round profile, soft and flexible, ideal as backer rod and insulation material for interior joints, especially slightly irregular cuts. It prevents sealant migration and ensures proper joint sealing. Joints should be exposed to minimal water to protect the sides. Density 18 kg/m³, color grey, open-cell structure. Length 1 m per rod, suitable for professional construction and renovation applications.

from

CHF

0.30

/ 1 m

from

CHF

0.30

/ 1 m

5 Versions
illbruck PR102 Rundschnur

illbruck PR102 Backer Rod

This closed-cell backer rod is suitable for professional backing of construction movement joints, connection joints and profiled glass seals in interior and exterior applications. Its water-repellent structure helps achieve the correct joint depth and geometry in accordance with the sealant manufacturer’s specifications. The flexible round profile is easy to insert into cavities and joints and provides a consistent limitation of the sealant depth.

Application
Insert the backer rod into the joint without stretching it and push it in until the required joint dimensions are achieved. When joining several pieces, lightly compress the ends. Movement joints must be designed and installed in accordance with DIN 18540.

1 Version