Achtung: Diese Webseite funktioniert ohne JavaScript möglicherweise nicht korrekt. Bitte aktivieren Sie JavaScript in Ihrem Browser.

Adhesives / Sealants

TEGUFIL® PE

Backfill profile

TEGUFIL® PE is a backfill profile made of polyethylene foam. The Smooth surface prevents water absorption and sticking of the sealant on the profile, which ensures optimal two-sided adhesion favored. The relatively solid material leads to a convex Limitation of the joint depth and thus an increased adhesive surface the sealant on the sides of the joint. On the one hand, this means that full mobility and elasticity of the sealant is guaranteed, on the other hand, the material acts as an excellent insulating material. TEGUFIL® PE is laid using a blunt Spatula or piece of wood with the marking of the required ones Joint depth.

Application
TEGUFIL® PE is particularly suitable as a backfill profile for precisely cut Outdoor joints, floor joints and for joints, that come into contact with water.

from

CHF

40.95

/ 100 m

from

CHF

40.95

/ 100 m

16 Versions
TEGUFIL® PUR

Backfill profile

TEGUFIL® PUR consists of open-cell polyurethane foam. The round profile is soft and cuddly.

Application
TEGUFIL® PUR is particularly used as a backfill and insulation material with slightly irregularly cut joints in the interior used.

Note
Joints in which TEGUFIL® PUR was used should, if possible, be come into little contact with water, around the sides of the joint to be exposed to prolonged water exposure. Putty infiltration!

from

CHF

158.75

/ 350 m

from

CHF

158.75

/ 350 m

5 Versions
TEGUCLEAN hand wipes

The abrasive hand cleaning cloths remove oil, grease, adhesives and silicone. The rough side can be used to loosen stubborn stains, which are then finally removed with the smooth side. The cleaning agent is particularly kind to the skin, cares for the hands and has been dermatologically tested. The fleece is tear-resistant and does not fluff.

1 Version
Protective mask FFP2

FFP2 protective mask

1 Version
Fountain foam

illbruck Fountain foam

This 1-component polyurethane foam is particularly suitable for sealing and joining concrete manhole rings and folded joints. It has excellent adhesion to a wide range of standard building substrates, e.g. concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics (polystyrene, PUR rigid foam, polyester, rigid PVC).

Product advantages
- Manhole ring bonding with excellent adhesion and seal - Leak test by MFPA Leipzig in accordance with DIN 4034 Part 2 - Good dimensional stability - Resistant to rotting, heat and water - Fast curing

1 Version
Fire-resistant PU foam

Nullifire Fire Rated

Nullifire FF197 is a modified, 1-component, fire resistant polyurethane foam polyurethane foam.

Area of application
FF197 is designed for filling and sealing linear joints with fire protection fire protection.

Product advantages
- Proof of fire resistance in joints between mineral components
- Quick & easy processing
- High yield
- Low consumption per running meter of joint
- Flexible area of application
- Can also be used manually thanks to 2-in-1 valve

1 Version
Facade sealant

illbruck Proflex Seal

This 1-component elastic hybrid polymer-based sealant is used for the elastic sealing of structural joints in accordance with DIN 18540 and for connection joints between concrete, masonry, metal, wood and various plastics in accordance with ISO 11600. An odorless splitting product is released during the curing process. In addition to its very good resistance to weathering, ageing and light, SP520 also adheres securely to standard building materials without primer (see primer table) and is insensitive to moisture. Once the sealant has fully cured, temperatures of up to +90°C are possible. Very well suited for MINERGIE-Eco, 1st priority according to Eco-BKP.

Product advantages
- Low viscosity even at low temperatures
- Short thread tension
- Solvent, isocyanate and silicone-free
- Permanently elastic
- Component testing according to ift guideline MO-01/1
- RAL-certified and externally monitored

1 Version
Instant Adhesive Plus

illbruck High Tack Pro

This elastic, stable, 1-component, hybrid polymer-based adhesive is particularly suitable for stress-equalizing bonding of a wide range of materials in the construction, trade and industrial sectors that require immediate, high initial adhesion. The adhesive can be used indoors and outdoors. It is ideal for horizontal and vertical bonding of materials without additional fixing, e.g. wood and wood-based materials, many metals, glass, mineral building materials, sandwich elements, plastics, etc.

Product advantages
- Easy to extrude
- Extremely fast initial adhesion
- Fast through-hardening
- Permanently elastic
- Solvent-, isocyanate- and silicone-free
- High mechanical strength
- Certified free of residential toxins according to EC1 PLUS

1 Version
High temperature sealant

illbruck High Temperature Seal

FA890 can be used to seal gaps and joints between heating elements and walls. The material can be used both inside and outside a building, especially when high temperature resistance is required.

Product advantages
- High temperature resistance
- Good extrusion and processing properties
- Adheres well to glass and non-corrosive, uncoated metal frames
- Contains no isocyanates or flame retardants
- Complies with REACh, RoHS and WEEE regulations

1 Version
Fire-resistant silicone sealant

Nullifire Fire Resistant

FS703 is a 1-component, elastic, fire-resistant, alkoxy-based silicone sealant with neutral cross-linking. FS703 offers 240 minutes fire resistance for interior and exterior construction joints.

Area of application
Component joints on walls and ceilings, joints between frames and reveals, joints in connecting areas of different materials (movement absorption capacity ±7.5 %).

Advantages
- Proof of fire resistance in joints between mineral building components
- Flexible area of application, even for joints up to 50 mm wide
- Excellent airtight joint seal
- Standard installation depth in a ratio of 2:1 (joint width to depth)
- Can be used both indoors and outdoors

1 Version
Fire-resistant acrylic sealant

Nullifire Intumesc. Acryl Seal

Nullifire FS702 offers a fire-resistant and flexible joint seal. The product is suitable for various installation situations and has excellent sound insulation and airtightness values.

Area of application
Suitable for fire-resistant joint sealing with a movement absorption capacity of up to ±7.5 %.
Nullifire FS702 can be used to fill linear openings between different building materials and to seal smoke control doors.

Advantages
- VKF Technical Information No. 30300
- Flexible area of application, joints up to 50 mm wide
- Variable color design possible, as it can be painted over
- Excellent acoustic and airtight joint seal

1 Version
Window and connection joint sealant

illbruck Flex Seal 20

illbruck SP510 is suitable according to DIN EN ISO 11600 for the permanently elastic and low-emission sealing of connection joints of windows and doors in interior and exterior areas.

The wide adhesion spectrum allows easy processing without primer on many substrates. The viscosity is adjusted so that the sealant is easy to apply even through narrow nozzles. Particularly suitable for sealing components with low strength, such as aerated concrete.

Product advantages
- Good adhesion with improved formulation
- Interior vapor barrier
- Low odor and free of solvents, isocyanates and silicone
- UV and weather resistant
- EC1 Plus certified

1 Version
Adhesive and sealant

illbruck adhesive / sealant

The bituminous adhesive and sealant can be applied immediately and even adheres to wet substrates. It is suitable for bonding bituminous roof coverings (including APP and SBS-modified bitumen), for waterproof sealing of joints, seams and connections of roof edges, chimneys, skylight domes, roof penetrations, for bonding in water drains and gravel containers, for sealing leaks and for (emergency) repairs, even on wet substrates, for fixing metal plates on concrete and stone-like substrates and for bonding edge strips for rising façade work.

Product advantages
- Thixotropic, non-toxic
- Highly insulating
- Protects against rust and moisture

1 Version
Universal adhesive

illbruck Universal Adhesive

This 1-component, stable, elastic, hybrid-based adhesive can be used for technical bonding and sealing in construction, ancillary building trades and crafts. Can be used, for example, on sheet metal cladding, pipe and cable penetrations or as a sprayable flange seal in heating construction. Very well suited for MINERGIE-Eco, 1st priority according to Eco-BKP. Certified free of residential toxins according to EC1 PLUS R.

Product advantages
- Permanently elastic
- Very easy to apply
- Solvent, isocyanate and silicone-free
- Very good adhesion to metals
- Short tack-free time (< 30 min.)
- Certified “1st priority” according to Minergie-Eco
- Certified free of residential toxins according to EC1PLUS R

1 Version
Adhesive and sealant crystal clear

illbruck Assembly Adhesive

This 1-component, fast-curing, highly transparent hybrid-based adhesive sealant enables applications in areas where a clear, permanently elastic sealing and bonding of glass elements offers product advantages, e.g. bonding of glass panes with aluminum or anodized frames (showcase and display window construction) and sealing on glass elevators. Very well suited for indoor bonding. This adhesive sealant is compatible with metals and most standard building materials.

Product advantages
- Glass bonding
- Very fast curing
- Odourless
- Solvent, isocyanate and silicone-free
- Crystal clear

1 Version
Styrene-free sealing resin

illbruck Chemi Taco

OT135 has been specially developed for the following purposes Anchoring in hollow or solid bodies as defined in ETE No. 19/0540. OT135 is particularly suitable for sealing shutters, blinds, gates, satellite dishes, signs and water heaters.

Product advantages
- Low odor: no styrene
- Cartridge can be used with a standard mastic gun
- Easy to use
- Fast absorption
- ETE n°19/0540

1 Version
Tube adapter

illbruck tube adapter set

For the illbruck valve of the PU foam cans, the AA210 tubes can also be used instead of a PU foam gun for processing as assembly foam.

Product advantages
- Quick and easy, just put it on, twist and you're done

1 Version
Joint smoother

illbruck tube adapter set

The multifunctional trowel set enables easy smoothing of illbruck sealants in accordance with existing regulations and can be used with hybrid, silicone or acrylic sealants, for example. The AA311 joint smoothers are available as angle or radius templates. Suitable e.g. for forming 45° angles / radii or smoothing expansion joints - preferably in sanitary / wet rooms (e.g. bathrooms, toilets, showers, kitchens, sanitary areas in general, balconies, dairies etc.).

Product advantages
- No time-consuming and costly edge masking required
- Dimensionally stable and edge-stable
- Flexible, hard-wearing and acid-resistant

from

CHF

13.75

/ 1 pcs

from

CHF

13.75

/ 1 pcs

2 Versions
Gun cleaner

illbruck gun cleaner

This gun cleaner enables both guns and their adapters to be cleaned thanks to the gun screw attachment and the attached spray valve attachment. It is particularly suitable for removing uncured PUR foam. It can also be used to remove fresh paint residue, wax, grease, oil and adhesives.

Product advantages
- High-quality cleaner for illbruck spray guns
- Can be used as a gun cleaner and cleaning spray

1 Version
Sale

Foam gun

illbruck foam gun

from

CHF

21.95

/ 1 pcs

from

CHF

21.95

/ 1 pcs

4 Versions
Hand pressure guns

illbruck hand pressure gun

from

CHF

47.75

/ 1 pcs

from

CHF

47.75

/ 1 pcs

4 Versions
Insulation board adhesive

illbruck Multi Foam Adhesive

This 1-component foam adhesive is especially suitable for bonding insulation boards, e.g. polystyrene (EPS, XPS), rigid polyurethane foam and mineral fiber insulation materials, in flat roof, perimeter (as described in DIN 4108-2), basement and wall areas. It is compatible with many cold bitumen coatings and adheres excellently to many standard building substrates, e.g. concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics.

Product advantages
- Simple leveling of slight unevenness
- No mixing technique required
- Quick and easy processing during installation
- Very good adhesion to a wide range of standard building substrates

1 Version
Sale

Fi-X 12 (PU-U)

1 Version
Sale

Window foam+

illbruck Perfect elastic f Pro

This single-component polyurethane foam is suitable for filling, insulating and insulating window connection joints in accordance with RAL specifications and for filling connection joints in door frames. Thanks to its high elasticity of over 30%, the foam can better absorb component movements. It has excellent adhesion to a wide range of standard building substrates such as concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics (polystyrene, PUR rigid foam, polyester, rigid PVC).

Product advantage
- Elasticity > 30%, externally monitored (MPA)
- MPA-tested winter foam from 0°C
- High sound insulation up to 60 dB
- Certified non-toxic in accordance with EC1 PLUS R

from

CHF

15.75

/ 1 pcs

from

CHF

15.75

/ 1 pcs

2 Versions
PU foam basic

illbruck Multi Foam Pro

This 1-component polyurethane foam is suitable for filling the connection joints of window and door frames, as well as for insulation. It has excellent adhesion to a wide range of standard building substrates, such as concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics (polystyrene, PUR rigid foam, polyester, rigid PVC).

Product advantage
- Universally applicable
- Can be applied from -10°C outside temperature
- High sound and thermal insulation
- Good dimensional stability
- Resistant to rotting, heat and water

from

CHF

11.40

/ 1 pcs

from

CHF

11.40

/ 1 pcs

2 Versions
Sale

2K Assembly Foam Plus

illbruck 2C Fix Foam

This 2-component polyurethane foam is particularly suitable for filling cavities and for insulation. It has excellent adhesion to a wide range of standard building substrates, e.g. concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics (polystyrene, PUR rigid foam, polyester, rigid PVC).

Product advantages
- Resistant to rotting, heat, water and many chemicals
- Fast processing due to short curing times
- High strength due to high density

from

CHF

20.10

/ 1 pcs

from

CHF

20.10

/ 1 pcs

2 Versions
Sale

Glass facade silicone

illbruck Window-Facade Seal

This 1-component silicone sealant is suitable for the highest demands in expansion joints in building construction. Particularly suitable for weather-side sealing on all-glass façades (structural glazing) as well as sealing on roof glazing, conservatories, curtain walls/window façades and other glass construction applications. Does not violate any MINERGIE-Eco exclusion criteria.

Product advantages
- Resistant to weathering, ageing and UV radiation
- Compatible with insulating glass edge sealants
- Matt surface
- High mechanical strength
- MINERGIE-Eco basis.

from

CHF

12.10

/ 1 pcs

from

CHF

12.10

/ 1 pcs

9 Versions
Sale

Building connection joints acrylic

illbruck construction joint acrylic

This dispersion acrylic sealant is suitable for sealing connection joints between window/door frames and masonry, cracks and joints in concrete, aerated concrete, stone, plaster and wood. For sealing window connection joints, the acrylic may only be used indoors.

Product advantages
- 20% permissible total deformation
- Can be painted and plastered over
- UV and weather resistant
- Also adheres to damp, absorbent substrates

from

CHF

7.40

/ 1 pcs

from

CHF

7.40

/ 1 pcs

2 Versions
Sale

Acryl

illbruck acryl

This 1-component acrylic dispersion is suitable for sealing joints in interior areas with little movement as well as for sealing joints and connections, e.g. on ceilings, lightweight walls, window sills and roller shutter boxes and for filling cracks and joints in aerated concrete, stone, plaster and wood. Very suitable for MINERGIE-Eco.

Product advantages
- Can be painted and plastered over
- Also adheres to damp, absorbent substrates
- Good UV and ageing resistance
- Easy to apply
- Quickly tack-free
- Certified free of residential toxins according to EC1 PLUS
- Certified 1st priority according to MINERGIE-Eco

from

CHF

6.35

/ 1 pcs

from

CHF

6.35

/ 1 pcs

2 Versions
Sale

Natural stone silicone matt

illbruck Natur Stone Seal matt

This 1-component silicone sealant is especially suitable for the elastic sealing of connection and expansion joints between natural stone such as granite, slate, terrazzo, marble etc. as well as for connection joints to other common building materials such as concrete, ceramics, metals, glass, PVC, treated wood and parquet floors. FA880 can be used in bathtubs and showers, kitchens, entrance halls, stairwells, floors, balconies, facades and terraces, both indoors and outdoors. Does not violate any MINERGIE-Eco exclusion criteria.

Product advantages
- Matt surface
- Especially for natural stone
- No edge zone discoloration
- UV-resistant
- MINERGIE-Eco basis

from

CHF

13.10

/ 1 pcs

from

CHF

13.10

/ 1 pcs

7 Versions
Universal adhesive

illbruck Multi Adhesive Pro

This 1-component, stable, elastic, hybrid-based adhesive can be used for technical bonding and sealing in construction, ancillary building trades and crafts. Can be used, for example, on sheet metal cladding, pipe and cable penetrations or as a sprayable flange seal in heating construction. Very well suited for MINERGIE-Eco, 1st priority according to Eco-BKP. Certified free of residential toxins according to EC1 PLUS R.

Product advantages
- Permanently elastic
- Very easy to apply
- Solvent, isocyanate and silicone-free
- Very good adhesion to metals
- Short tack-free time (< 30 min.)
- Certified “1st priority” according to Minergie-Eco
- Certified free of residential toxins according to EC1PLUS R

1 Version
Sale

Sanitary silicone

illbruck Sanitary Seal Pro

Due to its very good resistance to moisture, weathering and ageing, this 1-component silicone sealant is particularly suitable for applications in sanitary areas in accordance with EN 15651 Part 3, e.g. for elastic sealing of connection and expansion joints on tiled walls, bathtubs, shower trays, shower enclosures and for sealing in kitchens and metalwork/glass areas.

Product advantages
- Outstanding modeling properties
- Excellent smoothing properties
- 100% silicone
- Fast curing
- High notch resistance
- Fungicide treated
- EMICODE®EC1Plus certified Residential toxin-free

from

CHF

10.80

/ 1 pcs

from

CHF

10.80

/ 1 pcs

4 Versions

Brauchen Sie Hilfe??

Wir sind für Sie da und beraten Sie gerne. Rufen Sie uns an, schicken Sie uns eine Nachricht oder lassen Sie sich von uns zurückrufen.

Montag bis Freitag

7.00 - 12.00 / 13.00 - 17.15 Uhr

+41 (0)52 723 63 30

Request a callback

Send an email